|
|
Accessories
Accessories for use with Eltek Squirrels and Telemetry systems:
Please contact Eltek for a competitive price.
See also the Sensors section for
temperature humidity probes and sensors for the Electricity industry.
| |
|
|
1000
series |
RX250 |
| LC68 |
Computer Lead |
Connects the Squirrel serial port to the PC serial port |
|
|
| LC69 |
Modem Lead |
Connects the Squirrel serial port to a landline telephony
only modem |
|
|
| LC27 |
External Power Lead |
A
fused lead that connects the Squirrel to an external 9-15v DC supply |
|
|
| LC1D |
Event Lead |
A
450mm lead extending the 15 pin D Sub min to a pendant multiway "Screw
Terminal" block |
|
|
| LC-IS1000 |
Opto-isolated RS232 Lead |
Operationally identical to the LC68, however complete
galavanic isolation is provided using opto isolators installed in
the connector hood |
|
|
| LCTX |
Transmitter cable |
Connects RX250AL to a Transmitter |
|
|
| LCTX3 |
Transmitter cable |
Connects a PC to a Transmitter |
|
|
Wireless Connectivity
| |
|
|
1000
series |
RX250 |
|
RS232-434 Link |
The Eltek RS232-434 Link is a wireless link alternative to the LC68
lead. The link allows wireless connection between the Eltek data logger
and PC RS232 port. View the RS232-434 page
for more information. |
 |
 |
|
| |
|
|
1000
series |
RX250 |
| Moxa De-311 Serial to Ethernet Convertor |
The
kit consists of the De-311 ethernet adaptor, S/W and specific cable
form allowing TCP/IP or Ethernet connectivity. Visit www.moxa.com/product/nport_de-311.htm
for further details. |
 |
|
|
GSM Modem Kit
|
The
kit consists of the Wavecom modem, antenna and Squirrel specific connecting
cable form. When fitted, access to the Squirrel can then be achieved
via a GSM network. Note GSM working is only available with Darca Plus
software. Also a Data Sim card from the Network service provider is
required. |
 |
|
|
OSA
(On Site Alarm) |
This self powered siren & visual alarm module
is for use with Eltek loggers and the GenII RX250AL receiver logger.
The polycarbonate case can be wall mounted (fixing screws included)
and contains 4 miniature bulbs flashing at a frequency of approx.
3Hz, combined with a high output piezo alarm. A 9V battery is housed
in the case. Interconnecting cable (single pair required) and connector
is not included (The connector is supplied with the logger).
Sound output: Approximately 85dB @ 1M
Temp. range: -20°C to +60°C
Dims: L: 122mmW: 73mmD: 45mm (max) |
 |
| |
|
|
1000
series |
RX250 |
| MP12U |
Input: 93-263V AC at 50/60Hz
with UK / Euro or US plug. Please specify plug type when ordering.
|
 |
|
|
| RB12-6 |
12V 6Ah Sealed Lead Acid rechargeable battery |
|
|
|
Wall brackets
| |
|
|
1000
series |
RX250 |
|
WB0 |
Stainless steel logger wall bracket kit. The kit securely holds the
Squirrel place. The kit is suitable for use with any Squirrel but
should preferably be used on a flat surface only. No modification
is necessary to the Squirrel case. |
 |
|
|
| WBG |
Transmitter wall
bracket docking kit. (All transmitters, including RP250GD repeater
have a basic built in wall bracket). This kit enables fitment to difficult
or uneven surfaces. The kit provides additional docking security.
|
 |
|
|
Refer to Sensors section, generate
a part number and contact Eltek for pricing.
RH and Temperature probes
Antenna
| |
|
|
1000
series |
RX250 |
| LW-ANT/SMA |
Light
weight UHF dipole supplied with 5M coaxial lead terminated in SMA
connector and mounting hardware. (a butterfly clip is included for
semi permanent installations) |
 |
 |
|
Transmitter wall bracket
| WBG |
Wall bracket docking kit. (All transmitters, including RP250GD repeater
have a basic built in wall bracket). This kit enables fitment to difficult
or uneven surfaces. The kit provides additional docking security.
|
|
|
