Frequently Ordered 1000 Series Models

Below is listed a sample of frequently ordered models:

*The 1010 and 1020 Dataloggers are primarily used by the Electricity / Energy Management industry.

Available Input Types:

Eltek Squirrels don't stop there!
The models listed above are for combinations that we find are regularly required. However, Eltek specialises in customisation. Should you have a requirement that cannot be met with the above listed versions then browse the module pages and find a combination that best fits your application. The basic limits of Eltek Squirrels:

The number of channels
This is normally limited to 124, however additional channels can be provided, subject to physical and functional limitations.

The number of input modules
This is normally limited to 8 modules plus the CPU.

The case depth
The Eltek system consists of a standard case front, case rear and case side extension.
The case front and case rear are always 180mm by 120mm.
The case depth is variable so as to accommodate the number modules necessary.

The case front houses the CPU, display and button panel. The case base contains the battery compartment and can house one module. The case front and case base together give the minimum case depth of 60mm.

The 25mm case side extension is sandwiched between the case front and base and is in effect a stacking system. Up to 7 x 25mm side extensions can be used, hence the case sizes are 60mm (no case side extension), up to 235mm. The upper limit is 235mm in order to retain case stability and robustness.