Darca Heritage Release Notes Fixes / Additions: Version 1.1.55 - Reading No. column has been removed from the data tab in the summary window. Stats have been changed so that Time Between Alarms has become % of readings between alarms - Stats report: Time selection form has been changed so that the time perdio can be set from the end of the data rather than from the beginning - Fixed: Heading cells in summary window data and stats aren't coloured grey like they should be - Fixed: Summary Report Edit Copy works for data under Stats tab but not for data under other tabs - Fixed: Do a stats report, press stats setup and change some tick boxes, then OK - access violation - Fixed: Access violation when try to access and point at (with mouse) cursor values for data in v1FrenchTest (data contains some spikes...) Version 1.1.54 - Fixed: Downloaded data is corrupt for the last x bytes where x is the length of the mini header - Fixed: Adding notes crashes chart if "Store hidden chart in memory" option on - Fixed: Report tabs through each page whenever you change anything, then lands back on first page - Fixed: Charts crashing if colour block option on but hi and lo alarm thresholds not plotted - Fixed: If Cache charts in memory option is on, colour bands disappear when you move away from and then back to a chart tab - Fixed: Clicking the Home button on the chart should tick the appropriate time selector control - Fixed: Auto update timer not being set correctly when synchronise option turned on - Fixed: If you untick both Alarm boxes for a channel in Graph Chans / Axes, the colour band for that channel should be hidden - Fixed: Export Data - start time shouldn't default to beginning of data, default to a week before the end time instead - Fixed: Tickboxes are unticked in report after printing - Fixed: Report crashes in V50 when you print - Fixed: Colour bands not appearing in report when checked charts rather than sequential charts option is on Version 1.1.49 - Added save to XLS and copying and pasting of selected cells in Summary Version 1.1.48 - Fixed: If .new file can't be found for backup of new files, update doesn't quit correctly - Fixed: "Cache hidden charts in memory" - no datas are being plotted as 0 - Fixed: Any charts in the report that have been viewed in the chart window have their axis labels drawn incorrectly - Added command line parameters to open a site and update data on application launch - Fixed: If a parameter has an underscore in its name, "Validate And Set" doesn't work - Fixed: Timeout values set in preferences not being stored Version 1.1.41 - Fixed: Com ports above 9 not working Version 1.1.40 - Fixed: TMET data fix - Fixed: PNG Export Problem Version 1.1.37 - Fixed: Comms debug visible sometimes after install - Fixed: If a parameter has an alarm which isn't plotted checking the check box to plot the alarm in 'Axes' from a graph window causes access violations - Fixed: In chart report, select 'using the checkboxes to select individual graphs' – set no pages 0, graph size to 0. Now click the arrows on the right hand side of the screen - Fixed: In overlay if different zone tabs are visible on the top/bottom axis tabs, switching between the top/bottom axis tabs causes checkboxes to grey out - Fixed: If you have hide notes switched on and then do anything to change the notes (add, edit, open edit window) the notes reappear even with hide notes still appearing to be on - Fixed: Minimising Darca Heritage with 'minimise to system tray' selected causes it to disappear (not on system tray) - Fixed: Pressing F1 brings up a 'No context-sensitive help' error - Increased the range of selectable COM ports Version 1.1.36 - Fixed: Bringing up statistics summary for a part of a graph with no data roughly 12 hours causes external exception EEFACE - Fixed: If you pan the graph with a note (without an arrow) on until it's just on the edge, then pan back the arrow points to the edge of the chart - Fixed: Statistic report templates (for stats setup) don't remember settings for threshold statistics. - Removed inappropriate controls from Intervals tab in Squirrel settings Version 1.1.35 - Added reading time to Zone Graphic - Added load/save template controls to Statistics Setup when creating statistics report Version 1.1.34 - Fixed: Statistics reports with channels that no longer exist in the site don't load properly Version 1.1.33 - Fixed: When adding multiple extra channels in data summary extra rows appear in the grid - Fixed: Last entry in data summary/export always has 0 values for calculated channels - Fixed: Scrolling the graph gives 'floating point errors' Version 1.1.32 - Fixed: Clicking on blank zones and groups box gives an index OOB error - Fixed: Export with default times exports all but last record. Any other end time produces weird values - Fixed: On the first time statistics setup is accessed in a statistics report the arrange channels radio button will always be on parameter - Fixed: On a statistics report with a custom time period any use of the add channels dialogue causes the program to freeze - Fixed: Deselecting 'entire dat file' in statistics setup causes an access violation - Fixed: Statistics reports created to be organised by parameter are organised by group - Fixed: Viewing statistics reports causes access violations - Fixed: When changing the time period in a statistics report the dialogue box will always initially display both times as 00:00:00 30/12/1899 - Fixed: Opening dat files from windows causes Darca to crash on loading - Fixed: In summary calculated channel values are being rounded up or down - Fixed: If all threshold statistic check boxes are deselected it will be impossible to reselect any later - Fixed: In parameters setup if you're entering a negative value (e.g for an alarm) an error message will come up whilst there is only a – symbol in the text box - Fixed: Main alarms on calculated channels aren't being displayed in statistics summary/report Version 1.1.31 - Fixed: Adding a default parameter in complete mode to a new site causes list index out of bounds Version 1.1.30 - Made parameters list into a listbox in the Add Transmitters To Group section of Zones and Groups - Fixed: Merge problems with 'Start of new data file' ticked - Fixed: Deleting parameter from defaults causes error when params re opened - Fixed: Adding parameter to defaults doesn't work properly Version 1.1.29 - Fixed: The time of readings becomes slightly out during the plot with very large data files Version 1.1.28 - Added a function to create a blank DAT file in order to start data collection again from scratch - Fixed: try to exit the site setting window, but check the dot to stay connected to the squirrel nothing happens - you have to check the disconnect option. - Fixed: using the mouse scroll button to move up and down the list of sensors when setting up the transmitters / channels Version 1.1.27 - Fixed various merge problems (esp. to do with merging data that overlaps) - Fixed: Don't check range nos of channels during compatibility test for data merge Version 1.1.26 - Fixed: Don't display Squirrel battery warning as modal during automated update - it halts the update Version 1.1.25 - Fixed: Merge doesn't work with DATs created by newer versions of Darca Plus Version 1.1.24 - Update Data button is now enabled when 'Automatically update data in secondary user mode' option switched on Version 1.1.23 - Fixed: Closing meter window or zone graphic window in secondary user mode causes Access Violation Version 1.1.22 - Allow more than one instance of the application to run Version 1.1.21 - Fixed: Params window displays floating point values (Range min and max) with too many decimal places - Fixed: Ovlerays in multi period report - if an axis was previously unused, then is used by an ovleray, it's max / min aren't set up - Fixed: Ovleray form's test IsOverlay is wrong - it's checking against all chans in the group rather than the graph's graphindex - Fixed: Access Violation in report if it includes groups that have been subsequently removed from the site - Fixed: If a parameter has a warning alarm but it's not plotted, saving then opening a report causes an Access Violation Version 1.1.20 - Only display a maximum of 10 'squirrel couldn't start logging' messages (after a certain number are displayed the application will crash) - Fixed: Contact with wired loggers not working - Fixed: Insert New Chart. Tick boxes for a few overlays. It all plots fine. Zoom in, then out - the axes range is wrong - Fixed: Files aren't being commited to disk if the computer goes down during automated contact. DAT file can end up full of nulls Version 1.1.19 - Fixed: Some mathematical functions don't work in calculated formulae (abs, min, max etc.) - Fixed: Memory leak drawing charts with user channels in - Fixed: The checkbox configuration gets lost in the Chart Report if you switch notes on/off Version 1.1.18 - Fixed: Copying a group from a zone and pasting it into a blank zone doesn't work - View Transmitter Status menu command now works - Fixed: When groups in different zones have the same name, the wrong group is saved on the Zone Graphic. - The chart line width and the date/time format of the title are now saved in chart template files. Version 1.1.17 - When setting up parameters initially, RH now defaults to blue, aT to red. - Fixed: If you change the password and then cancel on the Site Options form, it doesn't cancel the fact the password's been changed. - Added option for secondary users to automatically update data (Site Options > Advanced) - Only leave squirrel connected after metering when in modem contact. Disconnect automatically after closing metering window when connected directly. - Fixed: Report window - changing orientation causes notes to be displayed in the wrong place (same with increasing no. of charts per page) - Warning alarms not displayed correctly in zone graphic when in secondary user mode Version 1.1.16 - Fixed: Clicking 'no' on 'Are you sure you want to disconnect?' in Squirrel Setup takes you back to the view data window - Fixed: MergeData - usedmem in global header is wrong if initial DAT has normal length header (26 bytes) and .new file gets merged. Normally only happens on second update of site. - Fixed: 'Check squirrel battery' option gets ticked when it should be unticked Version 1.1.15 - Added diagnostic error messages if the merge process fails due to files not being created / read / written to - Fixed: Time channel can get graphed if its channel number is in a group in the site - Made squirrel battery check / transmittery battery check / refresh timer settings site specific - Added Option to turn on / set level of transmitter battery check in preferences - Fixed: Transmitter battery check during update doesn't reference the channels correctly so you get warning messages for transmitters whose battery is OK - Fixed: if you overlay the same parameters on the top and bottom axis, but with different times, there is no indication on the legend of which line of data relates to which axis. - Fixed: If you 'disconnect' a modem call whilst dialling, the main form looks disconnected but the modem continues with the call unless you quit the program - Fixed: Untick and then re-tick a parameter: the colour changes - Added: When you have several windows open at one time, ie charts, meters, graphs, etc and have minimise them at the bottom of your screen, the name of the chart, graph etc is displayed in the window title Version 1.1.13 - Can now set the interval between labels on bottom and top axis (use Axis > Scales tab of Chart Appearance to set Increment) - Added automatic warning if the battery level of a transmitter goes below a certain level - Fix: Changing from Modem to Direct and vice versa didn't enable the Site Save button - In export - new option for physical channels only - New Hide notes option on Note menu in the chart Version 1.1.12 - Comms settings not being stored in registry (Modem timeout, Command retries, etc) Version 1.1.11 - Modem contact - on disconnect you get the message, "The selected communications device could not be opened for initialisation" (V1.1.10 only) Version 1.1.10 - Meter grid - buttons to open chart window don't work in 1.1.1 - Option to turn on/off modem comms debugging - XP Manifest causes reports to crash with Stack Overflow (V1.1.9 only) Version 1.1.9 - Option to turn on/off the hiding charts in memory feature (Site Options > Advanced) - Prompt when deleting a zone and ask if sure - If Prompt For Run Text turned on in Darca Plus, Darca Heritage prompts you for run text. Remove this. - Modem contact after the first successful connection hangs up during contact (versions 1.1.2 and above only) - If you start a modem contact with meter button then press cancel (and disconnect) the contact continues until the logger has been conected, only then does it stop. Version 1.1.8 - Parameters window – if you delete the figure in the to or from range boxes (to put in a new one) you get a “ is not a floating point value" message - parameter names with gaps, e.g. ""Wind Speed"" don't work in calculated channels Version 1.1.7 - If you have a zone with many groups, and you change from 1 month to 1 year on the chart, when you go through the tabs an error appears: "Not enough storage to process command" Version 1.1.6 - Error when scrolling charts - "invalid argument to date / time encode". - When you use the button controls to display 1 yr of data, you lose all dates on the time axis except the first - Charts - Axis window – top axis up and down arrows on number by week/month/year box does not work Version 1.1.5 - If you hae no leading zero set up in the time format in windows, errors of the type "X: is not a valid integer" appear when creating a statistics report Version 1.1.4.0 - Tidy up controls for entering Stats Report time period Version 1.1.3.0 - Make 'sensor' button in meter grid look like other buttons - With lower screen resolutions, the chart sometimes is off to the right when you have many zones and each one overlays the other to the right. The Parameter window is too wide as generally the X is off the right of the screen and a bit missing to the left. The Cursor window from the charts is also slightly too wide left and right as above. - Add 'install for specific user(s)' to installation Version 1.1.2.0 - When you attempt a modem contact and there is no answer (or another failure) you get a message saying "there was a problem hanging up the modem", then "there was no answer at that number". Version 1.1.1.0 - Tidy up the entering of the Administrator password - With the physical alarm can the wording be changed to be more obvious its an alarm, think it says something like "upper limits", "lower limits" but is not obvious its an alarm. Also a prompt to right click the channel to change / edit the settings. - Meter grid: Add info about a particular sensor: Tx S/N, squirrel chan, battery etc. - Add param to defaults / delete param from defaults buttons - Reports: At present the *.rpt and the *.tee are separate. Over a few months, the report folder become unmanagable with hundreds of tee files. Change so the tee files are integrated within the rpt, so that the report is a single file. - Merge problem if channel removed from the logger and .new file only has 1 reading in it - Merge code - check ranges etc. as well as channel numbers when comparing whether channels exist in both files - Modal error message appears if the squirrel can't be woken during manual update - Application crashes if autolog.txt is locked by another program (e.g. text editor) - Any change to the Tx->Squirrel channel mappings requires a 'Squirrel Setup' type contact to update the cfg file. Warn the user. Version 1.1.0.0 - Access violation saving reports. Error opening saved report. - Deselecting channels in the 'Top Axis' tab of the overlay window deselects them from the bottom axis (if they exist on the bottom axis) - If you click New Site, then cancel, you can't update data for the current site (the site name gets cleared) - The path for the zone graphic images is being saved wrong Version 1.0.22.0 - Notes not appearing in the Edit Notes window if their axis = the last axis in the site - The modem saved for the site appears correct in site settings but isn't being used for the contact - When changing from secondary user to admin, if you don't go into the site settings after you have changed from sec user to admin then the program does not remember the setting and the next time you open up the software it is secondary user again. However, if you go into site settings (don't need to change anything as admin is already selected) then it remembers its setting. Version 1.0.21.0 - An extra \\ gets added to the Export path when saving the site if the path is typed in manually - The modem selection isn't being saved properly - In meter grid, click on a group to bring up the chart window with that tab selected. - Write auto update errors to Autolog.txt file - Need to be able to turn off 'unable to start the squirrel logging' messages Version 1.0.20.0 - Visible alarms cause Access violations if chans in squirrel (.cfg file) don't match chans in site - Backup path defaults to program install path rather than site path