Darca Collect · Wireless Repeater · SKU RP250
RP250: Wireless repeater to extend your monitoring range
The RP250 is a wireless repeater from Eltek that extends the range of your monitoring network. It relays signals from transmitters that sit beyond direct reach of the receiver, so large, multi-zone and multi-building sites stay fully covered. It includes a USB interface for setup.
How it works
Extend range. Close the gaps.
The RP250 repeats the wireless signal from your transmitters, carrying readings from areas that are too far, or too obstructed, to reach the receiver directly.
Add repeaters to reach distant wings, basements and separate buildings, so every transmitter stays connected to the same system.
A USB interface is provided for setup. The RP250 sits within the Darca Collect layer, keeping the whole site reporting into one Darca Command view.
Repeaters earn their place on large built-environment sites and multi-building manufacturing sites, where a single receiver cannot cover every zone.
RP250 at a glance
- SKU RP250 (RP250-USB)
- Type Wireless repeater (Darca Collect)
- Function Extends wireless range by relaying transmitter signals
- Interface USB (for setup)
- Data link Wireless (GenII)
Full technical specification available on request. Speak to an Expert.
Applications
Where the RP250 is used
Wherever a monitoring network needs to reach further than a single receiver can cover.
Large, multi-zone sites
Extend coverage across a big estate.
Multi-building estates
Relay signals between separate buildings on one system.
Hard-to-reach areas
Reach basements, distant wings and obstructed spaces.
Questions about the RP250
Frequently asked questions
What is the RP250?
The RP250 is a wireless repeater from Eltek that extends the range of your monitoring network by relaying signals from transmitters that sit beyond direct reach of the receiver. It includes a USB interface for setup.
What does the RP250 do?
It repeats the wireless signal from your transmitters, so readings from distant or obstructed areas still reach the receiver and Darca Command.
When do I need a repeater?
When transmitters sit beyond the direct reach of the receiver, for example across large, multi-zone or multi-building sites, or in obstructed spaces.
Does the RP250 have a USB interface?
Yes. The RP250 includes a USB interface for setup.
Part of the Darca Solutions Suite
The RP250 is a wireless repeater in the Darca Collect layer. It extends the reach of your transmitters so readings flow through your site's connectivity hardware to Darca Command — the same cloud platform that manages all your other Eltek sensors, alarms, and compliance records.
Eltek has deployed more than 40,000 GenII wireless transmitters in field worldwide. Four decades of UK engineering. Since 1985.
Ready to specify the RP250 for your site?
Our specialists will help you confirm the right repeater placement to keep every transmitter on your site connected.