The GD43E transmitter is designed for users who wish to monitor temperature, temperature/humidity and an input from an external sensor e.g. CO2, O2 etc.
When used with one of the Vaisala probes listed below, for example, the transmitter provides a compact, comprehensive and cost effective monitoring solution for incubators.
The Vaisala CO2 sensors require an 24VDC external power supply in order to be used with the GD43E.
The GD43 is battery operated with an endurance of > 2 years based on a 5 minute transmit interval.
Connectors are included. If you require sensors, please order them separately.
Wired sockets for:
GD43E
This kit enables fitment of the transmitter's built-in wall bracket to difficult or uneven surfaces. The kit provides additional docking security.
The following products are supported:
WBG
| RF specification: | EN300-220 | |
| RF power: | 10mW | |
| Environment specification | ||
| Compliant to EN300-220: | -10 to +55°C | |
| Actual: | -30 to +65°C | |
| Humidity: | 100% non condensing | |
| Environmental rating: | IP40 | |
| Dimensions (footprint): | 78 x 41mm | |
| Transmission interval range: | 1 sec to 4 hours | |
| Indicator (red LED): | transmit active/on/off | |
| Control switch (concealed): | test mode / hibernate | |
| Antenna socket: | SMA | |
| Model(s) | Sensors | Range | Resolution | Accuracy |
| GD43E | external RH (RHT10E) external temperature (RHT10E) |
0-100% -40 to +120°C |
0.1% 0.1°C |
±2% (10 to 90%RH) ±4% (0 to 100%RH) ±0.4°C (+5 to +40°C) ±1.0°C (-20 to +80°C) |
| 1 x voltage / current | 0-100mV 0-1V DC 0-10V DC 0-20mA DC 4-20mA DC |
0.02/0.03mV
0.25mV 2.50mV ~5uA 0.05% |
±0.06mV
±0.5mV ±5mV 20uA 0.1% |
|
| 1 x external thermistor temperature | -50 to 150°C | 0.05°C (-5 to +75°C) 0.1°C (-25 to +100°C) 0.2°C (-40 to +125°C) |
±0.1°C (-5 to +75°C) ±0.2°C (-25 to +100°C) ±0.4°C (-40 to +125°C) |
|
| 1 x voltage / current | as GD43E | |||
| 1 x external thermistor temperature | as GD43E | |||
| GD43E | external RH (EplusE EE68) external temperature (part EplusE EE68) |
0-100% -40 to 80°C |
± 2% (10 to 90%RH) ± 3% (0 to 100%RH) 0.6°C (0 to+40°C) 1.0°C (-40 to +80°C) |
|
| 1 x voltage / current | as GD43E | |||
| 1 x external thermistor temperature | as GD43E | |||
Gen II Quick Start Instructions
GD43 Datasheet
GenII M Series transmitters with backup memory
